Foam Cleaning Gun

Cleaning foam guns is crucial for ensuring the longevity and smooth operation of guns and equipment after application. Cleaning before and after the foam hardens facilitates subsequent applications and prevents the gun from clogging.

Post-Application Cleaning

• The foam gun should be cleaned immediately after use.
• The inside and outside of the gun are cleaned using special foam cleaners or suitable solvents.
• If hardened foam adheres to the gun, it may need to be removed mechanically.

Gun Maintenance

• Check the gun mechanism before and after use.
• Ensure that the O-ring and seal areas are clean.
• Keeping the gun clean at all times facilitates application pressure and control.

Surface Cleaning

• Excess freshly applied foam should be wiped off immediately.
• Hardened foam surfaces can be removed with a spatula or sandpaper.
• Carefully clean up any foam that spills out after application.

Tips

• Store the styrofoam can and gun upright.
• Unused guns should not be left standing for extended periods without being cleaned.
• In cold environments, the foam may take longer to clean; in warm environments, process it quickly.

The information in this text may vary from time to time depending on the manufacturer. Always check the product label.